Liemke Lynx-2 DEMONSTRATION

1.879,00 

DEMONSTRATION MODEL IN VERY GOOD CONDITION; NEW CONDITION

PACKAGING & ACCESSORIES COMPLETE

Not available

Item number: WC94997

Liemke Luchs-2 thermal imaging attachment

High performance thermal imaging attachment 
In contrast to the Luchs-1, the Luchs-2 has a 50mm lens
Particularly long battery life

Lynx 2. Characteristics

Top class thermal imaging detector: High resolution sensor: 640 x 512px
➤ Large 50mm lens: Particularly suitable for field areas and large distances
harmonious picture: 12µm pixel interval
Very low start time: Only 5 seconds to start
Especially long
Battery life
: Up to 9h via internal battery
➤ 32GB memory for photo/video recording
➤ WiFi support
➤ Mechanical switch with good touch for intuitive operation

50mm objective lens – now also available with the Liemke Lynx

Liemke has expanded its Luchs series of devices with the Luchs-2 . Technically, the device is based on the Luchs-1 , but is equipped with a 50mm lens. The Luchs-2 is therefore not a replacement for the Luchs-1; rather, it is aimed at hunters with open fields and for target acquisition at distances well over 150m. The 50mm lens significantly increases the Luchs' system performance. It utilizes the familiar 640x512px resolution detector, manufactured using a 12µm process and exhibiting a sensitivity of <50mK (NETD), the same detector used in the Luchs-1.

Special feature of the attachment

In contrast to most other attachments, Liemke relies on a permanently installed battery for the Luchs. This has a particularly high capacity and supplies electricity for up to 9 hours. Another interesting thing about this device is the mechanical switch (on / stand-by / off), which is easy to feel and control even in absolute darkness. The Luchs-1 has a video recording function and can store up to 32GB video/photoMatesave rial.

Technical data:

 
Model  Liemke Lynx-2
Detection distance (manufacturer information)
2.500m
Wild Address (Venari empirical value)
 
Recommended shooting distance*
up to 200m
sensor resolution
640×512 pixels
Sensor technology
VOx (Vanadium Oxide), uncooled
Detector Sensitivity (NETD)
≤50mK
Pixel pitch
12 μm
objective lens
50mm/F1.0
Manually focusable lens
ja
lens focus
external
Lens protection cap available
yes (permanently installed)
Field of view (horizontal) in degrees
 
Field of view width at 100m distance
15,4m
Digital magnification (digital zoom)
2×, in direct zoom mode
frame rate
50Hz
Display Type
OLED
Display resolution
1.024 x 768 pixels
Brightness / contrast adjustment ja
video recording ja
photo recording ja
Storage 32GB
Video output yes, PAL (RCA port)
App support yes (via Bluetooth)
Diopter adjustment (for people who wear glasses) no
color palettes 5 pieces (White Hot, Black Hot, Extra Dark, Red Hot, Rainbow)
observation modes sun / rain
Picture-in-Picture mode no
WiFi ja
Hot Spot Tracking no
Remote Control no
Interface USB-C
shot resistance  
Degree of protection, IP code (IEC60529) IP67K
Operating temperature range, °С -20 to +50° C
Dimensions, mm 179 64 x x 69mm
Weight 625g
tripod thread ja
Charging via power bank ja
battery type integrated (permanently installed)
Operating time on battery (at t = 25 ° C), h *
up to 9h
 


*The "recommended maximum distance for application” is an estimate from our company and indicates the distance at which, depending on the prevailing environmental conditions, it is usually possible to shoot at blackwild can be applied for. Please also note the country-specific requirements! (e.g. NRW: Application with night vision / WB only in the context of ASF control exclusively from the pulpit at a maximum of 100m) 


Legal notice : The use of clip-on devices is now permitted under hunting law in most German states (exceptions: Bremen, Hamburg, Thuringia). However, the use of illuminators for clip-on devices is currently only permitted in Bavaria. Information provided without guarantee. Please check the applicable state hunting laws. Further information can be found here.

Other accessories

Questions & Answers about the Luchs-2

YES – the device can save up to 3 profiles, allowing multiple point-of-impact correction data sets to be saved for different lenses. Switching to a different lens/setup is therefore quick and easy.

The devices are up to the lens (35mm / 50mm) identical in construction.

YES – we recommend using the Duo Connector and the Duo Connector eyepiece (3,5x) for this purpose.

Useful links about the device

You are currently viewing placeholder content from YouTube . To access the actual content, click the button below. Please note that this will involve sharing data with third parties.

More information

You May Also Like …

Item number: WC94997